Brother DCP 9040CN - Manual (Page 58)

Security features
52
9
Using E-mail notification with user authentication
9
To use the E-mail notification function via secure SMTP server that requires a user authentication, you need
to use POP before SMTP and SMTP-AUTH methods. These methods prevent an unauthorized user from
accessing the mail server. You can use Web Based Management (web browser), BRAdmin professional and
Web BRAdmin to configure these settings.
Note
You need to match the settings of POP3/SMTP authentication with one of the E-mail servers. Contact your
network administrator or your internet service provider about the configuration before using.
How to configure the POP3/SMTP settings using Web Based Management (web browser).
a
Start your web browser.
b
Type “http://printer’s IP address/” into your browser (where “printer’s IP address” is the printer’s IP
address or the node name.).
For example:
http://192.168.1.2/ (if the printer’s IP address is 192.168.1.2.)
http://BRN123456/ (if the printer’s node name is BRN123456.)
Note
If you have edited the hosts file on your computer or are using Domain Name System, you can also enter
the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also
enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network Configuration
List. To learn how to print the Network Configuration List, see Printing the Network Configuration
List on page 25. The NetBIOS name assigned is the first 15 characters of the node name and by default
it will appear as “BRNxxxxxx” where “xxxxxx” is the last six digits of the Ethernet address.
c
Click Network Configuration.
d
Click Configure Protocol.
e
Click Advanced Setting of POP3/SMTP.