Brother DCP 9040CN - Manual (Page 31)

Control panel setup
25
3
Printing the Network Configuration List
3
Note
Node name: Node name appears in the Network Configuration List. The default Node name is
“BRNxxxxxx” (“xxxxxx” is the last six digits of Ethernet address).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
For MFC-9440CN:
3
a
Press Menu.
b
Press a or b to choose Print Reports.
Press OK.
c
Press a or b to choose Network Config.
Press OK.
d
Press Mono Start or Color Start.
For DCP-9040CN:
3
a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose User Settings.
Press OK.
d
Press Mono Start or Color Start.