Brother DCP 9040CN - Manual (Page 17)

Configuring your network printer
11
2
c
Double-click the unconfigured device.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and Ethernet address by printing the Network Configuration List. See Printing
the Network Configuration List on page 25 for information on how to print the Network Configuration List
on your print server.
d
Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows ® Macintosh ®
Windows ® Macintosh ®