Photogenic Professional Lighting Powerlight Manual (various) - Manual (Page 26)

POWERLIGHT QUICK CHANGE ACCESSORIES
UMBRELLAS:
EC32BC
(909143)
32” White satin flat panel inner umbrella with black blocking
outer umbrella.
EC45BC
(909201)
45” White satin flat panel inner umbrella with black blocking
outer umbrella.
EC60BC
(909317)
60” White satin flat panel inner umbrella with black blocking
outer umbrella.
EC32S
(909172)
32” Silver satin flat panel inner umbrella with black blocking
outer umbrella.
EC45S
(909288)
45” Silver satin flat panel inner umbrella with black blocking
outer umbrella.
EC60S
(909375)
60” Silver satin flat panel inner umbrella with black blocking
outer umbrella.
SOFT BOXES:
SB12x36
(958212)
12”x36” Silver inner panels from black blocking outer and
Quick-Change bracket.
PL30x40FR
(917698)
30”x40” Silver inner panels from black blocking outer and
Quick-Change bracket.
SB22
(959102)
22”x22” Silver inner panels from black blocking outer and
Quick-Change bracket.
SB36
(920917)
36”x36” Silver inner panels from black blocking outer and
Quick-Change bracket
SERVICE
The operator should not attempt to make repairs.
Consult a dealer for an authorized Photogenic Professional Lighting service agent.
This will provide you safety, insure proper operational functions and provide
continuation of your warranty.
For replacing the flashtube or modeling lamp, follow the directions and specifications
given earlier in this manual in the setup section.
Before removing the old tubes or installing new tubes, always unplug your PowerLight
and discharge the stored energy by pressing the “test” button. Wait approximately
two hours for the main capacitors to deplete any residual stored wattage. Never
place your fingers or any metal objects into the flash or modeling sockets. Contact
with high voltage may result.