Kino Flo Blanket Light 6X6 DMX - Manual (Page 5)

5
6) Draw up any slack in
the strap and tighten by
drawing down the ratchet
lever until tight.
Use the Harness Velcro straps
to secure the harnesses to the
frame.
The Blanket-Lite consists of four wiring
harnesses that power sixteen, 6ft HO
lamps. You must follow the color-coding
to achieve light level control features
(discussed in Ballast section).
Note: The easiest way to mount lamps
is if the Blanket-Lite Ratchet straps have
already been attached to the Frame.
Velcro loops hold lamps to the straps.
Important!
The color-code on both ends of the lamp
must be the same, and both ends must be
securely connected BEFORE turning on
power.
Once the lamps have been loaded, they
can stay attached to the Blanket-Lite and
placed in the Shipping Case for storage
and shipping.
If a second color temperature lamp is
used regularly, it is recommended to have
an additional pre-globed Blanket-Lite
(BKT-6X6) and an additional shipping
case (KAS-6X6).