Kino Flo Blanket Light 6X6 DMX - Manual (Page 4)

4
The Blanket-Lite should travel with lamps
preloaded.
1) It is recommended to mount
the frame between two stands.
Tilt the top edge of the frame
over the open shipping case.
Pull the Blanket-Lite straps
out of the box leaving the
Blanket-Lite in its case.
2) Line up Blanket-Lite straps
with the black Velcro on the
pipe frame. Line up the straps’
red line with the red arrow of
the tube. This ensures lamps
are evenly spaced out within
the pipe frame. Tighten loop
down to the pipe frame.
3) Tilt the frame up thereby lifting
the Blanket-Lite out from the
case.
4) Once the Blanket-Lite has
cleared the case, loop the straps
around the lower portion of the
pipe frame.
5) Hook the ratchet to the other
end of the strap.