Kessler MOTION CONTROL: CineDrive Quick Start Guide - Manual (Page 3)

Focus / Iris / Zoom Motor Connections
Step 1
Connect any FIZ MCBs to the tilt brick control ports using 8” Control cable(s).
Pan/Tilt Head and Turntable Connections:
Step 1
For a pan/tilt head, connect the pan and tilt bricks together using an 8” Control cable.
Either port on each brick can be used.
Step 2
Connect either the pan or tilt brick to either the brain or unused Axis 1 MCB control port
using the supplied 5” Control cable. Turntable connections are the same - any control
port can be used as long as there is a connection back to the Brain.
Step 2
Connect FIZ motor(s) cables to the corresponding FIZ (Lens 6 and/or Lens 7) MCB.