Gossen Mavo-Spot 2 USB User Manual
Page 7
GOSSEN Foto- und Lichtmesstechnik GMBH
7
Self-Test
After inserting the batteries, the microcomputer executes a self-test. All of the elements
included in the display panel appear at the display during this test. The display test can
be aborted by pressing any key.
Battery Indicator
The MAVO-SPOT 2 requires two 1.5 V AA batteries (alkaline manganese). The capacity display
indicates the
current battery power level. Measured values are retained in memory when the batteries are changed.
= The batteries are fully charged.
= The batteries are partially discharged
– be prepared to replace them.
= The batteries are depleted and must be replaced as soon as possible.
The Protective Filter
Screw the included protective filter or one of the close-up lenses or the attachment for
contact measurements (optional accessory) onto the lens of your MAVO-SPOT 2.
Either the protective filter, a close-up lens or the attachment for contact
measurements (optional accessory) must always be used.