Gossen Mavo-Spot 2 USB - Manual (Page 22)

22
GOSSEN Foto- und Lichtmesstechnik GmbH
4.5.6 Saving Measured Values (in groups)
Measured values can also be saved to 10 groups of 100 measuring locations each.
This function is accessed by setting the “Linear - Page” DIP switch in the battery
compartment to “Page” (see page 9, Linear - Page DIP switch).
Press the
key to select the Mem function. The last used group appears at the display.

Group selection can be accessed by simultaneously pressing the and keys.

The last used memory group and the designations SEL und PAGE appear at the display.

Select the group (P-01 through P-10) to which your measurements will be saved with the MFK.

Group selection can be exited by simultaneously pressing the and keys.

The other memory functions are used as described above.

Measured values saved to the groups must be individually deleted.
Measured
values are
saved, edited,
read out and
deleted as
described above
in section 4.5
(page 18 ff).