Gossen Mavo-Spot 2 USB User Manual

Page 21

GOSSEN Foto- und Lichtmesstechnik GMBH

4.5.3

Saving Measured Values with Correction Factor

If a correction factor has been programmed into the MAVO-SPOT 2 (see also page
17), a corresponding display appears automatically. You can now switch back and
forth between Corr1 and Corr2 by pressing the

key. Corr2 (a factor of 3.142) is

permanently programmed into the instrument

– you can switch to illumination

measurement with the GOSSEN reflection standard (optional accessory) at any time
by pressing the

key.

4.5.4

Reading Out Measured Values

With the Mem function, you can scroll through the measured value memory with the
help of the MFK. Each respective stored value is displayed along with the memory
location number. The longer the key is pressed and held, the faster the scroll speed
becomes.

4.5.5

Clearing Memory

Measured value memory can be cleared with the Mem function.
The entire measured value memory is cleared by simultaneously pressing and holding the

and

keys for at

least 2 seconds. CLR appears at the display in order to acknowledge that memory has been cleared.
“------” appears once again at the memory location display.