Brother 1600/1650 - Manual (Page 32)

24
Formatting the Label
Specifying a label length
The length of the label can be specified as follows.
1 Press g, then A.
2 Press l or r until LENGTH is displayed.
3 Press u or d until the desired label length is
displayed (or use the number keys to type in the
desired setting).
4 Press n.
Specifying a margin size
The size of the margins for the left and right sides of the text can be specified.
1 Press g, then A.
2 Press l or r until MARGIN is displayed.
3 Press u or d until the desired margin
setting is displayed (or use the number keys to
margine type in the desired setting).
4 Press n.
☞ Once the
PERSONAL symbol category becomes full , newly selected symbols will
overwrite older ones unless the Symbol Save function is set to OFF . (Refer to
Specifying if the PERSONAL symbol category is continually updated on page 40 . )
0.30" to 39.00" (6 to 999 mm)
0.10" to 4.00" (2 to 99 mm)