Brother 1600/1650 - Manual (Page 29)

21
Basi
c F
u
n
ct
io
n
s
The following special characters can only be added to bar codes created using protocols
EAN128 and CODE128.
Entering a symbol
There are 147 symbols and pictures available with the Symbol function.
1 Press s. The last category used is displayed.
2 Press u or d to select the desired category.
3 Press l or r until the desired symbol is selected.
4 Add the symbol(s) to the text.
• To add a single symbol or the last one in a series, skip to step
6 .
• To add a series of symbols to the text, press g, then n.
5 For each additional symbol, repeat steps 2 through 4 .
Symbol Character Symbol Character Symbol Character Symbol Character
0 (SPACE) 18 < 36 BEL 54 EM
1 ! 19 = 37 BS 55 SUB
2 ” 20 > 38 HT 56 ESC
3 # 21 ? 39 LF 57 {
4 $ 22 @ 40 VT 58 FS
5 % 23 [ 41 FF 59 |
6 & 24 \ 42 CR 60 GS
7 ’ 25 ] 43 SO 61 }
8 ( 26 ^ 44 SI 62 RS
9 ) 27 _ 45 DLE 63
10 * 28 NUL 46 DC1 64 US
11 + 29 47 DC2 65 DEL
12 , 30 SOH 48 DC3 66 FNC3
13 – 31 STX 49 DC4 67 FNC2
14 . 32 ETX 50 NAK 68 FNC4
15 / 33 EOT 51 SYN 69 FNC1
16 : 34 ENQ 52 ETB
17 ; 35 ACK 53 CAN