E-flite Stearman PT-17 15e ARF - Manual (Page 23)

Receiver Installation
Parts Required
Fuselage assembly
9-inch servo extension lead (2)
Receiver
Tools Required
Clear tape Hook and loop tape
Double-sided adhesive tape
Ο 1. Attach the receiver to the right hand side of the
battery compartment with double sided adhesive
tape. Connect the throttle lead from the ESC.
ΟΟ 2. Feed a 9-inch long servo extension lead from
the aileron lead opening in the lower wing root
to the receiver.
ΟΟ 3. Repeat for the opposite side and connect the
leads to the receiver.
Ο 4. Connect the rudder and elevator servo leads to
the receiver.
Ο 5. Secure the long antenna to the front of the radio
tray with clear tape.
E-flite Stearman PT-17 15e ARF Assembly Manual 2 233