E-flite Stearman PT-17 15e ARF - Manual (Page 22)

2 222 E-flite Stearman PT-17 15e ARF Assembly Manual
ΟΟ 7. Insert the transport jig between the wing
panels approximately 1/2-inch outboard of the
upper panel separation point.
ΟΟ 8. Secure the panels to the transport jig using a
rubber band on the upper and lower panel.
ΟΟ 9. Use a 3/32-inch balldriver to remove the wing
retaining screws and remove the wing panel
assembly from the fuselage.
Ο 10. Repeat Steps 7, 8, and 9 to remove the opposite
wing panels.
Battery Installation
Parts Required
Fuselage assembly Battery strap
Hook and loop tape
Ο 1. Remove the cockpit hatch. Install a battery strap
around the battery tray in preparation for later
mounting of the battery.
Ο 2. Attach a piece of adhesive backed hook
and loop tape to the battery and tray to help
locate the battery and stop it moving in flight.