E-flite Stearman PT-17 15e ARF - Manual (Page 15)

Aileron Installation
Parts Required
Lower wing panels w/ailerons (L & R)
CA hinges (6)
Tools Required
Thin CA Felt-tipped pen
ΟΟ 1. Prepare three CA hinges by inserting a T-pin in
the center of each hinge.
ΟΟ 2. Remove the tape holding the aileron to the wing
and separate the aileron. Insert a hinge into
each of the hinge slots in the leading edge of
the aileron.
ΟΟ 3. Slide the aileron hinges into the hinge slots in
the trailing edge of the lower wing panel.
ΟΟ 4. Slide the aileron and wing panel together on
the hinges then remove the T-pins.
ΟΟ 5. Align the trailing edge of the aileron with the
trailing edge of the wing. Slide the aileron left
or right as necessary to maintain an even gap
at each end of the aileron.
E-flite Stearman PT-17 15e ARF Assembly Manual 1 155