E-flite Stearman PT-17 15e ARF - Manual (Page 14)

1 144 E-flite Stearman PT-17 15e ARF Assembly Manual
ΟΟ 10. Using a #0 Philips screwdriver, install the
aileron servo to the hatch with the screws
provided with the servo.
ΟΟ 11. Use a 1/16-inch drill bit in a pin vise to
enlarge the outer hole in the servo arm.
ΟΟ 12. Remove the tape from the string near the
aileron servo opening in the wing. Tape or tie
the string to the aileron servo lead. and use it
to pull the lead through the wing.
ΟΟ 13. Use the string to pull the aileron servo lead
through the wing.
ΟΟ 14. Apply 1-2 drops of thin CA to each of the
aileron hatch mounting holes in the wing.
ΟΟ 15. Using a #0 Philips screwdriver, attach the
aileron servo and hatch to the wing with four
2mm x 10mm sheet metal screws.
Ο 16. Repeat steps 3 through 15 for the opposite wing.