E-flite Stearman PT-17 15e ARF - Manual (Page 13)

ΟΟ 4. Hold the servo in place on the underside of the
hatch with the arm centered in the opening and
aligned with the edge of the hatch.
ΟΟ 5. Use a pencil to mark the location of the servo
mounting tabs.
ΟΟ 6. Use medium CA or 6-minute epoxy to glue the
servo mounting blocks to the aileron hatch.
ΟΟ 7. Place the servo on the hatch and use a pencil to
mark the servo mounting holes.
ΟΟ 8. Use a 1/16-inch drill bit in a pin vise to make
the servo mounting holes.
ΟΟ 9. Apply 2-3 drops of thin CA to each hole to
strengthen the wood.
E-flite Stearman PT-17 15e ARF Assembly Manual 1 133