E-flite T-34 Mentor 25 ePTS RTF manual - Manual (Page 33)

33 E-flite T-34 Mentor ARF Assembly Manual
 11. Slide the wing panels together. Connect the linkage
to the remaining flap control horn and adjust the linkage
to set the neutral position for the remaining flap. Secure
the wing panels together as outlined in the first section
of the manual; Wing and Landing Gear Installation
beginning on page 7.
 12. Use the radio system to set the position for the flap.
It may be necessary to use the radio system to change
the amount of throw electronically to match those in the
following images. Your goal here is to mimic the flap
settings from the previous section.