E-flite T-34 Mentor 25 ePTS RTF manual - Manual (Page 25)

25 E-flite T-34 Mentor ARF Assembly Manual
General Maintenance
Required Parts
Fuselage
Required Tools and Adhesives
Phillips screwdriver: #1 Hex wrench: 2.5mm
 1. Use a #1 Phillips screwdriver to remove the two screws
that secure the spinner cone to the spinner backplate.
 2. Check that the propeller adapter is tight using
a hex wrench or screwdriver that fits into the hole
in the adapter. You will turn this nut counterclockwise to
loosen or clockwise to tighten.
 3. To check that the motor is secure to the firewall, you
will first need to remove the spinner. Use a 2.5mm hex
wrench to remove the four screws that secure the cowling
to the fuselage.