E-flite T-34 Mentor 25 ePTS RTF manual - Manual (Page 13)

13 E-flite T-34 Mentor ARF Assembly Manual
Battery and Wing Installation
Required Parts
Fuselage assembly Wing assembly
Motor battery Nylon wing bolt (2)
Required Tools and Adhesives
Flat screwdriver: 1/4-inch
 1. Remove the canopy from the fuselage by grasping the
canopy at the aft edge and rocking it left to right. This
will disengage the magnets that hold it in place. The front
has two pins that key into the fuselage.
 2. Use the hook and loop straps to secure the motor
battery in the fuselage. The position of the battery
can be adjusted inside the fuselage to correctly balance
the aircraft. For your initial flights, position the battery as
far forward in the fuselage as possible.