E-flite T-34 Mentor 25 ePTS RTF manual - Manual (Page 23)

23 E-flite T-34 Mentor ARF Assembly Manual
Elevator Throw
 3. Use a ruler to check the amount of throw for the
elevator. Move the elevator stick fully and check the
measurements. Adjust the radio as necessary following
the instructions provided with the radio to achieve the
following measurements.
Low Rate: 3/8-inch (9.5mm) (Up/Down)
3/8-inch (9.5mm)
Low Rate
3/8-inch (9.5mm)
Low Rate
High Rate: 3/4-inch (19mm) (Up/Down)
3/4-inch (19mm)
High Rate
3/4-inch (19mm)
High Rate
Rudder Throw
 4. Use a ruler to check the amount of throw for the
rudder. Move the rudder stick fully and check the
measurements. Adjust the radio as necessary following
the instructions provided with the radio to achieve the
following measurements.
Low Rate: 3/4-inch (19mm) (Right/Left)
High Rate: 3/4-inch (19mm) (Right/Left)
3/4-inch (19mm)
High and Low Rate
3/4-inch (19mm)
High and Low Rate