E-flite T-34 Mentor 25 ePTS RTF manual - Manual (Page 14)

14 E-flite T-34 Mentor ARF Assembly Manual
 3. Pass the leads for the ailerons (and flap) through the
cross bracing in the fuselage. Guide the tab at the front
of the wing into the slot in the fuselage.
 4. Use two nylon wing bolts and a flat screwdriver to
secure the wing to the fuselage.
 5. Plug the aileron lead into the receiver in the slot
marked AILE. (The flap servo is plugged into the AUX1
slot of the receiver when the optional flaps have been
installed.) Replace the canopy back onto the fuselage.
You will want to make sure you have the wires pressed
down flat and to the side of the receiver before installing
the top hatch.