E-flite P-38/F-5E Lightning 400 ARF User Manual
Page 20
0
E-flite P-38/F-5E Lightning Assembly Manual
5. Solder both sets of motor leads together with a male
EC3 connector. Make sure to solder the positive to
positive and negative to negative. Check operation of the
motors. The left-hand motor (when viewed from behind)
should rotate counterclockwise when viewed from the
front. The right-hand motor (when viewed from behind)
should rotate clockwise when viewed from the front.
Note: If either motor is running in the opposite direction
that it should, simply reverse any two of the wire leads
that connect to the ESC.
6. Remove the backing from the factory installed double-
sided tape on the sides of the boom. Slide the cowling
onto the boom, pressing it against the tape once you
have confirmed proper alignment.