E-flite Byp Yak 3D ARF - Manual (Page 34)

 5. Now that the landing gear has been installed,
we can install the strut fences to the bottom of
the bottom wing. They are angled 25 degrees
towards the wing tip as shown.
Note: A template has been provided to achieve
this angle. It is located on page 37. Please cut
this template out and use it for alignment.
Center of Gravity / Battery Installation
Required Parts
• Airframe
• Battery (480mAh, 3-cell, 11.1 V Li-Po, JST (THP4803SJ)
• Hook and loop
Note: A 730mAh 3-cell 11.1 V Li-Po
(THP7303SJPL) battery can be used as an
option to the 480mAh, 3-cell 11.1 V Li-Po
battery. This battery will provide longer
flight times.
An important part of preparing the aircraft for flight is
properly balancing the model.
Caution: Do not inadvertently skip this step!
34