E-flite Byp Yak 3D ARF - Manual (Page 32)

Landing Gear Installation
Required Parts
• Airframe • Landing gear
• Tail skid • Wheel pant (2)
• Wheel retainer (2) • 1 1
/
4
" (32mm) wheel (2)
• Landing gear fairing (2)
Required Tools and Adhesives
• Hot glue • Foam-safe CA
 1. Glue the tail skid using foam-safe CA
 2. Install the landing gear into position by pressing
up into the landing gear mount.
Note: Use a small amount of foam-safe CA if
the landing gear is loose in the slot.
32