Bosch LOGIXX 9 - Manual (Page 33)

33
Installing, connecting and transporting the
appliance
Safety instructions
d Risk of injury!
The washing machine is very heavy.
Lift with caution.
Warning
Frozen hoses may tear/burst. Do
not install the washing machine in
areas where there is a risk of frost or
outdoors.
The washing machine may be
damaged. Do not lift the washing
machine by its projecting parts
(e. g.Ădoor).
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
connected by a specialist.
Transport, e.g. when
moving
Before transporting the washing
machine
- Turn off the tap.
- Disconnect the washing
machine from the mains.
- Dismantle the supply and
drainage hoses,
- Preparing and inserting
theĂtransport bolts
i Having transported the
appliance and ensured
proper installation and
connection, allow the Drain
programme to run through
before starting the first wash
programme.
Preparing and inserting
theĂtransport bolts
q Remove the lower covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve
until the end of the screw is
level with the end of the sleeve.
q Insert the transportation
protection devices and and
tighten the bolts. The lug on the
washer must be located in the
groove in the rear panel of the
housing.