Bosch LOGIXX 9 - Manual (Page 15)

15
Display
The running programme and
programme status are displayed
onĂthe left side of the first line.
TheĂcurrent time is displayed on the
right side when Ready" is
displayed on the left side.
Spin speeds and the expected end
time of the programme as well as
symbols for spin speed, wash
mode, soaking, signal and
childproof lock are displayed on the
second line.
Spin speed or without final spin
Maximum spin speeds of the
programme are displayed.
---" is displayed during the
DrainĂprogramme.
The speeds can be changed.
WithoutĂfinal spin can also be
selected.
Without final spin (---")
The laundry is left in the final rinsing
water. Recommended for sensitive
washing.
Use this additional function to
prevent creasing if the washing
cannot be taken out of the drum as
soon as the programme ends.
Programme finished at
The time is displayed when the
programme will end.
Symbol for Normal Wash"
This symbol is on if Normal Wash"
was selected.
Symbol for Quick Wash"
This symbol is on if Quick Wash"
was selected.
X Symbol for Intensive Wash"
This symbol is on if Intensive
Wash" was selected.
Z Symbol for signal
This symbol is on if the signal
volume was not set to Off.
G Symbol for childproof lock
This symbol is on if Child lock: ON
was selected in the menu.
Additional options
Prewash
If the Prewash button was pressed,
aĂprewash cycle is run in addition to
the selected programme.
Programme for pretreatment of
heavily soiled, stained textiles.
Soaking programme lasts 2 hours
and ends with a short spin cycle.
Water is drained. Washing time is
extended accordingly.
Rinse Plus
If the Rinse Plus button was
pressed, a rinse cycle is run in
addition to the selected
programme. Washing time
isĂextended accordingly.
Reduced Ironing
If the EasyĆiron button was pressed,
aĂgentler, reduced spin cycle is run
followed by fluffing up of clothes.
AfterĂthe spin cycle, the laundry is
loose in the drum - creasing is
reduced. Washing time is extended
accordingly.
i Remove the laundry as soon as
the spin cycle is complete.
Indicator light in the
Start/Pause button
The indicator light conveys the
following information:
- The Start/Pause indicator light
flashes (red): Programme can
be started. Top up possible.
- The Start/Pause control light
comes on (red): Programme is
running. The door is locked for
reasons of safety and cannot
be opened.
The door can be opened because
the Start/Pause button was
pressed.
i Exception:
When the childproof lock is
activated, the Start/Pause
indicator light is off. At the end
of the programme the door
remains locked.