Watts T55-85MHP40 - Manual (Page 24)

www.stenner.com 24
4. Drill a 17/64" hole into the lid or bung cap of the solution tank. Secure
strainer weight to the end of the suction line as per provided instructions
and feed it into the hole.
5. Suspend 2-3" above the tank bottom.
Installation
continued
– suction line
Strainer
w/weight
Strainer w/weight
(disassembled view) Strainer
w/weight
(closeup view)
Do not mix chemicals in the
solution container. Follow
recommended mixing procedures
according to the manufacturer.
Do not operate pump unless
chemical is completely in solution.
Turn pump off when replenishing
solution.