Installation, Spill recovery – Watts T55-85MHP40 User Manual
Page 22
www.stenner.com
22
Spill recovery tube
drains solution
back to tank.
Partial hole is punched through
with a #2 Phillips head screwdriver.
1/4" plastic spill recovery tube is
inserted in hole. Use section of
suction/discharge tubing.
Strainer
w/weight
Spill
Recovery
Tube
Installation
continued
– spill recovery
SPILL RECOVERY
In case of tube rupture, chemical
drains back into solution tank,
preventing spillage onto
ground/floor and stops chemical
from collecting in tube housing.
This manual is related to the following products: