beautypg.com

Hinkley Lighting PRESCOTT 4962OB User Manual

Start here, Assembly instructions

background image

H I N K L E Y L I G H T I N G

33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.563.5500 hinkleylighting.com

assembly instructions

Family: Prescott Item No. 4962

1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.

start here

4962

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 1 - Fixture Assembly

Drawing 2 - Shade mounting

A

4

fixture

center column

Shade Mounting detail - see Drawing 2

1. To attach shade, slip mounting ring (1) around top of center column coupler (2) and
on top of plate (3) - see Drawings 1 & 2.

2. Align holes (B) in mounting ring (1) with holes (C) in plate (3).

3. Thread in studs (5), after studs are in place, thread on barrel knob (6) and tighten to
secure shade.

*** The construction of this fixture will be accomplished by first, installing hardware
to junction box, hanging the fixtures from the ceiling, and then assembling the main
body structure,

1. Refer to hanging instruction sheet (I.S.19) provided to hang fixture. Then refer back
to this sheet to continue installation of this fixture.
NOTE: do not rotate the arms (A) to there final location. They must remain in current
location until shade and glass is installed.

2. After main body is installed follow below instruction to install shade and glass.

120

0

Drawing 3 - Arm Rotation

3

4

1. To install glass (7) slip glass over socket (S) followed by spacer (8), hold parts in
position - see Drawing 1.

2. While holding glass (7) and spacer (8) in position thread socket ring (9) onto socket to
secure glass to fixture.

3. Fixture can now be lamped accordingly.

06.01.13

5

1. At this time the fixture arms (C) can be rotated apart until they are equally spaced
120 degrees apart - see Drawing 3.

S

B

C

3

2

5

6

5

6

A

A

A

7

8

9