Hinkley Lighting PARKER 4436KZ - Manual

assembly instructions
Family: Parker Item No. 4436 KZ
1. Find a clear area in which you can work.
1. Rotate arms (A) outward from current position until they are equally spaced,
approximately 60 degrees apart. Note: do not rotate the arm that is in line with the
center column - see
Drawing 1 .
2. Refer to hanging instruction sheet (I.S.19) provided to hang fixture. Then refer back
to this sheet to continue installation of this fixture.
1. Remove threaded socket ring (2) from socket (1) - see Drawing 2.
2. Slip glass (3) over socket (1).
3. Thread socket ring (2) onto socket (1) to secure glass (3).
4. Fixture can now be lamped accordingly.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body structure, installing the mounting hardware to the junction box, hanging
the fixture from the ceiling and then installing the fixture glass.
start here
4436
Note: Maximum wattage for 4436 fixture is 100 watts per bulb. 3.16.09
3
Drawing 1 - Fixtu
Drawing 2 - Fixture Assembly
re Assembly
A
A
A
60º
2
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
3
1
A
A
A
A
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com