Hinkley Lighting STOWE 4729MC - Manual

assembly instructions
Family: Stowe Item No. 4729 MC
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging the
fixture from the ceiling and then installing fixture glass.
start here
4729
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble fixture, slip top cap (4) with loop, along wire and thread onto top of
fixture (5) - see Drawings 1 and 2.
2. Rotate top arms (A) until they are equally spaced 120 degrees apart .
3. Rotate middle tier arms (B) until they are equally spaced 60 degrees apart, and
equally spaced between the uprights (2).
4. Rotate bottom arms (C) until they are equally spaced 60 degrees apart.
5. Attach top of upright (2) to top of main body (1), using the knob and stud (3)
provided.
6. Please refer to the hanging instruction sheet (I.S. 19-50) provided to hang fixture.
Then refer back to this sheet to continue fixture installation.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
4
8
1
3
5
2
A
B
C
1. To install glass, remove socket ring (6) and spacer (7) from socket (9) - see Drawing 2.
2. Slip glass (8) over socket (9).
3. Slip spacer (7) over socket (9).
4. Thread socket ring (6) onto socket (9) and hand-tighten.
5. Fixture can now be lamped accordingly. 3
12.22.08
C
C
C
C
C
B
A
A
A
B
B
B
B
B
C
120º
60º
60º
7
9
6
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com