Hinkley Lighting SUSSEX 4797EZ - Manual

assembly instructions
Family: Sussex Item No. 4797 EZ/BN
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body, installing the mounting hardware, making all necessary electrical connections,
hanging the fixture from the ceiling and then installing the fixture shade.
start here
4797
Note: Maximum wattage for 4797 fixture is 60 watts per bulb.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble fixture, rotate arms (A) of main body fixture until they are equally
spaced 90 degrees apart - see Drawing 1.
2. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture.
Then refer back to this sheet to install glass.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
1
3
2
1.22.09
A A
A
A
90º
1. To install shade, attach uprights (1) to hook on fixture canopy - see Drawing 2.
2. Attach hook on other end of upright (1) to the looped wire (3) inside of the shade.
3. Fixture can now be lamped accordingly.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com