Hinkley Lighting DILLON 3665BN User Manual
Assembly instructions

assembly instructions
Item No. 3665
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
3665
*** The construction of this fixture will be accomplished by first assembling the main body,
hanging the fixture, and then installing the fixture glass.
2
3
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
6.1.12
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
1. To assemble main body (1), spread arms (A) until they are equally spaced 72 degrees apart
- see Drawing 1.
2. After arms (A) are positioned correctly the fixture may be mounted to the ceiling. Please refer
to instruction sheet (IS19-91) provided to install fixtuure.
3. After installation is complete refer back to this instruction sheet on how to attach the glass.
12
1. To install glass, remove socket ring (3) from the socket (1) - see Drawing 2.
2. Slip glass (2) over socket (1).
3. Thread socket ring (3) onto socket (1) and tighten.
4. Fixture can now be lamped accordingly
3
2
1
A
A
A
A
A
72º
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, Ohio 44012 800-446-5539 www.hinkleylighting.com