Hinkley Lighting KEY WEST 1616RB User Manual
Start here, Assembly instructions
![background image](/manuals/589079/1/background.png)
assembly instructions
Family: Key West Item No. 1616 RB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Prepare mounting strap (A) by threading the two 8-32 long mounting screws (B)
into the back of the gull wing bracket - see Drawing 1.
• Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the back plate (E) - see Drawings 1 and 2.
2. Attach mounting strap (A) to junction box (J) using two 8-32 screws (C) 1” long (not
provided) - see Drawing 2.
1. To mount fixture to the wall, slip the two mounting screws (B) through the two
mounting holes in the backplate (E) - see Drawing 2.
2. While holding fixture in place, thread the two ball knobs (F) onto mounting screw
(B) and tighten.
1. To complete assembly of this fixture, slip rubber washer (1) over nipple (5) located on
the top of roof assembly (6) - see Drawing 3.
2. Thread top knob (2) onto nipple (5) and tighten.
3. Fixture can now be lamped accordingly.
4. Line up studs (7) on the cage with the holes (8) located in the roof assembly (6).
5. Thread ball knob (4) onto the stud (7) to secure cage (3) to roof (6).
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, mounting the mounting strap to the junction box,
mounting the fixture to the wall, and then assembling the main body of the fixture.
start here
1616
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 1 - Strap Detail
Drawing 2 - Fixture Mounting
B
(side view)
gull wing
bracket
backplate
B
Drawing 3 - Fixture Assembly
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
5
2
4
6
3
1
5
8
7
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com