Hinkley Lighting NEST FR41624ORB User Manual

Nest, B1 d c 2 3 4 e, Ca g 5 6

FR41624ORB

NEST

ASSEMBLY INSTRUCTIONS

Assembly of this fixture will be accomplished by first assembling the main body,

installing the mounting hardware to the junction box, making all necessary electrical

connections, hanging the fixture from the ceiling and then installing the fixture glass.

SAFETY WARNING:

Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply off during installation. If new wiring

is required, consult a qualified electrician or local authorities for code requirements.

STEP 1

1 Thread stem (b) onto threaded stud (1) atop the cluster assembly (a),

2 Slip assembled parts (a) and (b) along wire and thread onto swivel (2)
located at the top of yoke (c) - SEE DRAWING 1.

STEP 2

1 Slip cluster and stem assembled in previous Step 1 into cage (d).
2 Align studs (3) on yoke (c) with holes in tab (4) of cage.
3 Thread barrel knobs (e) onto end of threaded stud (3) to secure cage to
yoke (c) - SEE DRAWING 2.

STEP 3

STEP 4

1 Fixture can be lamped accordingly at this time.

1 To install glass (g), after fixture is hanging, Slip glass through bottom of
cage, slip over socket (5), bulb, and into glass holder (6) - SEE DRAWING 2.

Bulbs:

100W MED.

Replacement Parts:

GLASS: R41624GL

01.01.12

800.421.3517 WWW.FREDRICKRAMOND.CO M

Refer to Hanging Instruction Sheet [FRIS19] to hang fixture.

DRAWING 1

DRAWING 2