Hinkley Lighting MONDO FR49298PCM - Manual

FR49298PCM
MONDO
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first assembling the fixture, making
all necessary electrical connections and then hanging the fixture.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1 Rotate arms (a) until they are equally spaced 45 degrees apart - See Drawing 1.
2 To install glass, remove socket ring (b) from socket (d) - See Drawing 2.
3 Slip glass (c) over socket (d).
4 Thread socket ring (b) onto socket (d) and tighten using socket ring tool provided.
5 Fixture can now be lamped accordingly.
6 Thread bulb shield (e) onto socket (b).
STEP 2 Refer to Hanging Instruction Sheet [FRIS19-20] to hang fixture and complete
installation.
[DRAWING 1]
[DRAWING 2]
Bulbs: 60W G9 Replacement Parts: GLASS: R49292GL BULB SHIELD: R4750BLSH
2.17.09
800.421.3517 WWW.FREDRICKRAMOND.COM
a
a
e
c
d
b
45°