beautypg.com

Hinkley Lighting FLOURISH 3284SL User Manual

Start here, Assembly instructions

background image

- 1 -

____

Assembly Instructions

____

Item No. 3284

start here

1. Find a clear area in which you can work.

2. Unpack Fixture and glass from carton.
3. Carefully Review Instructions Prior to assembly.

***

The construction of this fixture will be accomplished by first assembling the

stems to the main body, attaching the mounting strap to the junction box,

making all necessary electrical connections, hanging the fixture from the

ceiling, installing the shade, and then installing the glass lens.

Drawing 2 – Glass Installation

SAFETY WARNING: READ WIRING AND GROUNDING
INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS.

TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW
WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR

LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Before installing Glass, the fixture can be lamped accordingly -see Drawing 2.
2. Slide nipple (3) through tube (2) and thread into wire body.
3. Slide the shade (11) into place and screw knobs (12) into crossbar (13)
4. Slide check ring (4) onto nipple followed by one flat steel washer (5), then
one rubber washer (6), glass (7), then again with the remaining rubber washer

(6), the remaining flat steel washer (5), and thread on the Hex nut ( 8).
5. Slide on decorative cover (9) followed by the decorative knob (10).

Drawing 1 – Mounting Detail

1. Determine the desired height the chandelier will be installed at.
2. The fixture is supplied with a variety of stem lengths. Determine what combination
of stems are needed to achieve desired length - see Drawing 1.
3. Slip stems over wire and thread first stem onto top of chandelier. Repeat this process
until all required stems are threaded together.
4. Slip wire through center of canopy swivel and thread onto stem assembly.

stem

wire

wire

wire

stem

Drawing 1 – Stem Installation

3284

01.01.13

1. Fixture is ready for installation. Please follow instruction sheet (IS19-93) to
continue assembly.

2. Return to this section of the instruction sheet for shade and glass installation.