Hinkley Lighting PLYMOUTH 4252OB - Manual

assembly instructions
Family: Plymouth Item No. 4252 OB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, hanging the fixture from the ceiling, and
then installing the glass.
start here
42
52
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Please refer to the hanging instruction sheet (I.S. 19-75) provided to hang fixture.
Then refer back to this sheet to install fixture glass.
1. Remove threaded socket ring (1) from socket (2) - see Drawing 1.
2. Place glass (3) over exposed section of socket (2) .
3. Thread socket ring (1) onto socket (2) to secure glass (3).
4. Repeat steps 1-3 for remaining glass.
5. Thread bottom finial (4) into coupler (5) and tighten.
6. Fixture can now be lamped accordingly.
Drawing 1 - Glass Installation
1
4
5
2
3
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com