Hinkley Lighting BOLLA 4659OB - Manual

assembly instructions
Family: Bolla Item No. 4659
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging
the fixture from the ceiling, and then installing the glass.
start here
46
59
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, remove loop (7) and top plate (3) of center column assembly
(2) - see Drawing 1.
2. Slip wire through center stem (2).
3. Thread center stem (2) into coupler (A).
5. Attach top of scroll (5) to fixture canopy (4) using lockwashers and nuts provided.
6. Attach bottom of scroll (5) to fixture body (1) using ball knob stud (6).
7. Replace top plate (3) and thread loop (7) onto top of column assembly.
8. Please refer to hanging instruction sheet (I.S. 19-50) provided to continue installa-
tion of this fixture. Then refer back to this sheet to install glass.
1. To install glass, remove socket ring (10) from threaded socket (8) - see Drawing 2.
2. Slip glass (B) over threaded socket (8) and slip retaining washer (9) onto socket (8).
3. Thread socket ring (10) onto socket (8) to retain glass (B).
4. Fixture can now be lamped accordingly
Drawing 1 - Fixture Assembly
Drawing 2 - Glass Installation
7
4
2
5
6
1
10
9
B
8
A
3
5.29.08
4. To prepare scroll (5) for installation slip ball (B) onto threaded tube (C).
C
B
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com