Hinkley Lighting MIME FR45601BNI - Manual

FR45601BNI/FBZ
MIME
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first assembling the main body,
installing the mounting hardware to the junction box, hanging the fixture and then
installing the shade and crystals.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1
STEP 2 Refer to Hanging Instruction Sheet [FRIS19-40] to hang fixture. Then refer
back to this sheet to continue installation of this fixture.
STEP 3
1
2
3
[DRAWING 1]
Bulbs: 3-60W CAND. Replacement Parts: SHADE: R45601SH (BNI FINISH),
R455601AMBSH ( fbz FINISH),
R45602CRY-A
01.01.13
3 d
ce
1 b
e
4
2
5
After unpacking fixture main body can be installed prior to attaching the shade.
Take shade (1) and line up holes in tabs (d) with the holes in
end of arms (b). Shade tab shold be on top of the arm -see Drawing 1.
Slip flat head screw (2) through hole in arm and hole in shade
tab. Thread barrel knob (3) onto end of screw (2) to secure shade.
Repeat process with the remaining arms.
Thread finial (4) onto threaded tube (t) found at the bottom of the fixture.
Attach crystals (5) at point (e) as indicated in Drawing 1.
e
5
t
4