Hinkley Lighting BOLLA 4653OB - Manual

assembly instructions
Family: Bolla Item No. 4653
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, mounting the mounting strap to the junction box,
making all necessary electrical connections, hanging the fixture from the
ceiling, and then installing the glass.
start here
46
53
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, slip loop (4) along wire and thread onto nipple (A) and
tighten - see Drawing 1.
2. Please refer to the hanging instruction sheet (I.S. 19) provided to continue
installation of this fixture. Then refer back to this sheet to install glass.
1. To install glass, remove retaining ring (4) from threaded socket (1) - see Drawing 2.
2. Slip glass (2) over threaded socket (1) and slip retaining washer (3) onto socket (1).
3. Thread socket ring (4) onto socket (1) to secure glass (2).
4. Fixture can now be lamped accordingly.
Drawing 1 - Fixture Assembly
Drawing 2 - Glass Installation
4
A
wire
1
2
3
4
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com