Hinkley Lighting FRANCESCA FR40312SLF User Manual

Francesca

FR40312SLF

FRANCESCA

ASSEMBLY INSTRUCTIONS

Assembly of this fixture will be accomplished by first installing the mounting hardware

to the junction box, making all necessary electrical connections, mounting the backplate to
the wall and then installing the fixture glass.

SAFETY WARNING:

Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply off during installation. If new wiring is
required, consult a qualified electrician or local authorities for code requirements.

STEP 1

Prepare mounting strap (a) by threading nipple into the center hole of

the mounting strap (a), approximately 1/4“- see Drawing 2.

Attach mounting strap (a) to junction box (j) using two screws (b) provided.

STEP 2

Make electrical connections from supply wire to fixture lead wires.

Refer to instruction sheet (I.S. 18) and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of this fixture.

STEP 3

To mount backplate to wall, slip center hole of backplate (e) over nipple (c) and

hold fixture in position - see Drawing 2.

Thread decorative knob (d) onto end of nipple (c) and tighten to secure fixture.

STEP 4

Basic fixture assembly is accomplished by slipping candle sleeve (2) over

socket (1) - see Drawing 1.

2 Please proceed to crystal installation instructions to complete fixture

assembly.

[DRAWING 1]

[DRAWING 2]

Bulbs:

60W CAND.

Replacement Parts:

CRYSTALS: R40310CRY / R40310CRY-A / R40310CRY-B

01.01.12