Hinkley Lighting MONDRIAN 4576KZ User Manual

Start here, Assembly instructions, Family: mondrian item no. 4576 kz

assembly instructions

Family: Mondrian Item No. 4576 KZ

1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.

*** The construction of this fixture will be accomplished by first assembling
the fixture, installing the fixture glass, installing the mounting bracket to the
junction box, making all necessary electrical connections and hanging the
fixture from the ceiling.

start here

4576

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. To assemble fixture, thread center tube (1) into coupler (A) approximately 3/8” - see
Drawing 1.
2. Slip square tube (2) over center tube (1) and fit over square base (B).
3. Thread knurl nut (3) onto center tube (1) and tighten.
4. Thread loop (4) onto end of center tube (1) and tighten.

1. To install glass panels, unwrap and organize glass panels - see Drawing 2.
• Note: Center column is on swivel. After glass is installed caution must be used when
moving the fixture so stem does not swivel and break glass.
2. Refer to glass installation instruction sheet provided. Then refer to the hanging
instruction sheet (I.S. 19) provided to hang this fixture. Then fixture can be lamped
accordingly.

Drawing 1 - Fixture Assembly

Drawing 2 - Glass Installation

3.23.10

panel 1

panel 2

panel 3

panel 4

top of panel

bottom of panel

white glass

white

glass

water

glass

water

glass

white

glass

clear seedy

water glass

clear seedy

clear

seedy

clear

seedy

white glass

water glass

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com