Hinkley Lighting SUSSEX 4796EZ - Manual

assembly instructions
Family: Sussex Item No. 4796 EZ/BN
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first preparing the
fixture for mounting, installing the mounting hardware, making all necessary
electrical connections, hanging the fixture from the ceiling and then installing the
fixture shades.
start here
4796
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Slip column (2) along wire and thread into decorative coupler (A) located on the
main body (1).
2. Thread column (3) into decorative coupler (B) located on main body (1).
3. Slip secondary canopy (4) along wire and over threaded tubes (C) and (D) respect-
fully, of columns (2) and (3).
4. Slip spacers (5) over threaded tubes (C) and (D).
5. Slip canopy cover (6) along wire and over threaded tubes (C) and (D) and then over
center tubing (E).
6. Thread decorative knob (7) onto center tubing (E) and tighten to secure canopy (6).
7. Slip loop (8) along wire and thread onto threaded tube (C).
8. Thread loop (9) onto threaded tube (D).
9. Please refer to the hanging instruction sheet (I.S. 19-75) provided to hang fixture.
Then refer back to this sheet to install glass.
1. Slip candle sleeve (F) over socket (G).
2. Slip shade harp (10) over end of candle sleeve (F).
3. Fixture can now be lamped accordingly.
Drawing 1 - Fixture Assembly
22
28 29
25
2 D
2 B A
C
E
7
6.7.09
2 5
23
2 10
24
26
2 F
2 G
2 1
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com