Hinkley Lighting CALISTOGA 2092 - Manual

assembly instructions
Item No. 2092
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, hanging the fixture from the ceiling, and then
installing the glass.
start here
2092
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Please refer to the hanging instruction sheet (I.S. 19) provided to hang this fixture.
Then refer back to this sheet to install the glass.
Drawing 1 - Glass Installation
06.01.13
3
4
7
5
2
1
6
R
Glass installation Instructions - see Drawing 1.
1. First take glass (2) and slip small hole in top, over the socket (1), and hold glass in
position.
2. Slip socket spacer (3), lip side up, into glass and over socket (1), followed by socket
cover (4), threaded side up, and thread cover on to socket and tighten to secure glass.
3. Slip yoke assembly (5) over glass (2) making sure bottom lip of glass fits into ring (R).
4. Align yoke coupler (6) with threaded arm (7) and thread coupler onto arm and
tighten to secure yoke assembly (5).
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.