Hinkley Lighting MONDRIAN 4575KZ - Manual (Page 3)

H I N K L E Y L I G H T I N G 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.com
• This instruction sheet is intended for the installation of the Mondrian family glass.
1. To install glass panels, it is neccessary to first remove the crossbar located at the top
of the cage assembly. This is attached to the center cluster assembly of the fixture.
2. To remove crossbar, remove screws (A) from the top of cage assembly (B) - see
Drawing 1.
3. Remove cage assembly from crossbar and center cluster assembly.
4. Set crossbar and center cluster assembly along with previously removed screws aside.
start here Drawing 1 - Glass Installation
Drawing 2 - Glass Installation
1. At this point you should have your glass panels layed out as instructed on the main
instruction sheet. Remember to note top and bottom.
2. Take the first panel and place bottom of panel (1) behind metal channel (2) located
at the bottom of cage assembly (3) - see Drawing 2.
3. Tilt panel up into the top of cage (4) and carefully bend down clips (5) with a screw
driver to secure panel in cage.
4. Repeat step 2-3 for remaining glass panels.
5. Once all glass panels have been secured, replace crossbar and center cluster assembly
by reattaching crossbar to top of cage assembly with screws (A) - see Drawing 1.
A B
B
5
4
1
3
2
A
C
C
Mondrian glass installation
10.29.09
2
top view of fixture cage