Hinkley Lighting PROSECCO FR49438RCO User Manual
Prosecco
FR49438RCO
PROSECCO
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first spreading the arms to there
proper position, assembling main fixture assembly, installing mounting hardware to
junction box, making all necessary electrical connections, hanging the fixture and then
installing the fixture shade and crystals.
SAFETY WARNING:
Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1
To assemble main body, slip center tube (b) along wire and thread into nipple (c)
located at the top of the main body assembly (a) - See Drawing 2.
2
Slip outer tubing (d) over center tube (b) followed by cap (e).
3
Slip loop (f) along wire and thread onto top of center tube (b) and tighten.
4
Rotate arms (g) until they are approximately 60 degrees apart
- See Drawing 1.
5
Rotate arms (h) until they are approximately 120 degrees apart and equally spaced
between arms (g).
6
Rotate arms (i) until they are approximately 120 degrees apart
and equally spaced
between arms (g).
STEP 2
Refer to Hanging Instruction Sheet [FRIS19] to hang fixture. Then refer
back to this sheet to continue installation of this fixture.
STEP 3
1
To install shade, remove socket ring (1) from socket (3)- See Drawing 2.
2
Slip candle sleeve (2) followed by shade (4) over socket (3) and hold in position.
3
Thread socket ring (1) onto socket (3) and hand-tighten to secure shade.
4
Fixture can now be lamped accordingly.
STEP 4
Refer to Crystal Installation Sheet provided to install crystals.
[
DRAWING 2
]
Bulbs:
60W G 16½ CAND.
Replacement Parts:
SHADE: R49437SH CRYSTALS: R49430CRY-B1,
R49430CRY-b2, R49430CRY-C2, R49430CRY-C3
1.26.09
800.421.3517 WWW.FREDRICKRAMOND.COM
c
b
d
1
3
2
4
i
g
h
e
f
a
[
DRAWING 1
]
g
g
g
60°
120°
g
g
g
h
h
h
i
i
i