Hinkley Lighting DILLON 3668BN - Manual

assembly instructions
Item No. 3668
1. Find a clear area in which you can work.
2.
3. Carefully review instructions prior to assembly.
366
8
2
3
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
6.1.12
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
1. To assemble main body (1), spread LOWER arms (A) until they are equally spaced 60 degrees
apart - see Drawing 1.
3. After installation is complete refer back to this instruction sheet on how to attach the glass.
12
1. To install glass, remove socket ring (3) from the socket (1) - see Drawing 2.
2. Slip glass (2) over socket (1).
3. Thread socket ring (3) onto socket (1) and tighten.
4. Fixture can now be lamped accordingly
3
2
1
A
60º
A A
A
A A
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com