Hinkley Lighting BOLLA 4662OB - Manual

assembly instructions
Family: Bolla Item No. 4662
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, hanging the fixture from the ceiling, and
then installing the glass.
start here
46
62
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Please refer to the hanging instruction sheet (I.S. 19-75) provided to continue
installation of this fixture. Then refer back to this sheet to install glass.
1. To install glass, remove threaded socket ring (4) and retaining washer (3) from socket
(1).
2. Place glass (2) over exposed section of socket (1) and slip retaining washer (3) over
socket (1).
3. Thread socket ring (3) onto socket (1) to secure glass.
4. Fixture can now be lamped accordingly.
Drawing 1 - Fixture Assembly
1
2
3
4
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com